The Time Machine: A Homemade Gaming Seat

"The Time Machine" is a homemade gaming seat built from 50mm PVC pressure pipes. The following parts were used in the building process (links to Amazon.de where available): 8x PVC 50mm pressure pipe 1m http://www.amazon.de/dp/B005HDK41U 18x 90° angle segment http://www.amazon.de/dp/B005HCOMDW 6x 45° angle segment http://www.amazon.de/dp/B003Y7AKTM 28x T-segment http://www.amazon.de/dp/B005HDINLI 2x pieces of wood 110mm x 40mm x 500mm 8x 50mm clamps 3x cans of black spraypaint 1x saw 1x box of sandpaper 1x measuring tape 1x pencil 1x Pattex 100% All-Purpose glue 100g 8x SPAX screws 1x phillips head screwdriver 1x pack of zip ties, black, 400mm 1x used car seat 1x seat cover from Amazon http://www.amazon.de/dp/B00JFMI3AS The measurements are as follows: Total length: 135cm Total width (no arms): 55cm Total width (including arms): 116cm Total height (without seat and camera pipe): 64cm Total height (including camera pipe): 125cm You can find a picture with all the separate measurements added to it in this imgur album: http://imgur.com/a/Fwy0r I took inspiration from this build: https://www.reddit.com/r/oculus/comments/2bl9td/370aud_later_and_im_dk2ready_bring_it_on/ which in turn was based on this build: http://www.isrtv.com/forums/topic/681-simul8r-mark-ii-pvc-plans-bottom-of-pg-7-donations-accepted/?page=1

الفئة